Product manual

retries
■ snmp-server host informs retries < 0 to 255 >
Maximum number of times to resend an inform request. Default: 3.
Range: < 0 to 255 >
snmp-authentication
■ [no] snmp-server enable traps snmp-authentication
Select RFC-1157 (standard) or HP-ICF-SNMP (extended) traps. Sends a trap for a failed
authentication attempt via SNMP.
Next Available Options:
■ standard -- Send traps for Standard Authentication failures.(p. 533)
■ extended -- Send traps for Extended Authentication failures .(p. 529)
standard
■ [no] snmp-server enable traps snmp-authentication standard
Send traps for Standard Authentication failures.
timeout
■ snmp-server host informs timeout < 1 to 21474836 >
Number of seconds to wait for an acknowledgement before resending the
inform request. Default: 15 seconds
Range: < 1 to 21474836 >
Default: 15 seconds
traps
■ [no] snmp-server enable traps
Usage: [no] snmp-server enable traps snmp-authentication <standard | extended>
[no] snmp-server enable traps port-security
[no] snmp-server enable traps login-failure-mgr
[no] snmp-server enable traps password-change-mgr
[no] snmp-server enable traps authorization
[no] snmp-server enable traps arp-protect
[no] snmp-server enable traps dhcp-snooping
[no] snmp-server enable traps link-change <PORT-LIST>
Description: Enable/disable event traps to be sent
by the switch.
Next Available Options:
■ link-change -- Traps for link-up and link-down. ([ethernet] PORT-LIST) (p. 531)
■ snmp-authentication -- Select RFC-1157 (standard) or HP-ICF-SNMP (extended) traps.(p. 533)
■ dhcp-snooping -- Traps for DHCP-Snooping.(p. 529)
■ arp-protect -- Traps for Dynamic ARP Protection.(p. 528)
■ auth-server-fail -- Traps reporting authentication server unreachable.(p. 528)
533© 2008 Hewlett-Packard Development Company, L.P.
snmp-serverCommand Line Interface Reference Guide