Product manual

Range: < 0 to 7 >
mib
■ snmp-server mib
Usage: snmp-server mib hpSwitchAuthMIB <excluded|included>
Description: Enable/Disable SNMP support for the hpSwitchAuthentication MIB.
When the MIB access is enabled, Manager read/write access
to the MIB is permitted. Operator read/write access to the MIB
is always denied. For security reasons, network administrators
are encouraged to disable SNMPV2c before using the MIB.
Next Available Option:
■ hpSwitchAuthMIB -- Enable/Disable SNMP support for the hpSwitchAuthentication MIB(p. 530)
password-change-mgr
■ [no] snmp-server enable traps password-change-mgr
Sends a trap when a manager password is reset.
port-security
■ [no] snmp-server enable traps port-security
Sends a trap for a failed authentication attempt through a web, MAC, or 802.1X
authentication session.
response-source
■ [no] snmp-server response-source
Usage: [no] snmp-server response-source [IP-ADDR|dst-ip-of-request|
loopback<0-7>]
Description: Specify the source ip-address policy for the response pdu.
By default snmp response pdu will contain the ip address of
the active interface on which response will be sent. The default
behavior is in compliance to rfc-1517.
The no form of the command will revert to default behavior.
IP-ADDR -- ip-address specied will be used as the source ip
address in the snmp response pdu.
dst-ip-of-request -- Destination ip of the snmp request will be used as
the source ip address in the snmp response pdu.
loopback 0-7 -- lexicographically minimum congured ip address on the
specied interface will be used as the source ip
address in the snmp response pdu.
Next Available Options:
■ ip-addr -- IP Address for the source ip address field in the snmp response pdu. (IP-ADDR) (p.
531)
■ dst-ip-of-request -- Destination Ip address of the snmp request pdu will be used as the source
ip address in the snmp response pdu.(p. 529)
■ loopback < 0 to 7 > -- For the specified loopback interface, lexicographically minimum configured
ip address will be used as the source ip address in the snmp response pdu.(p. 531)
532© 2008 Hewlett-Packard Development Company, L.P.
snmp-serverCommand Line Interface Reference Guide