Product manual
Enables SNMP support for the hpSwitchAuthentication MIB.
informs
■ snmp-server host informs
Specify if informs will be sent, rather than notications. When an SNMP
Manager receives an inform request, it can send an SNMP response back to the
sending agent. This lets the agent know that the inform request reached its
destination.
Next Available Options:
■ retries < 0 to 255 > -- Specify the number of retries for informs.(p. 533)
■ timeout < 1 to 21474836 > -- Specify the interval between retries for informs, in seconds.
(NUMBER) (p. 533)
ip-addr
■ snmp-server response-source IP-ADDR
IP Address for the source ip address eld in the snmp response pdu.
■ snmp-server trap-source IP-ADDR
IP Address for the source ip address eld in the trap pdu.
link-change
■ [no] snmp-server enable traps link-change [ETHERNET] PORT-LIST
Traps for link-up and link-down.
location
■ snmp-server location LOCATION
Description of the switch location.
login-failure-mgr
■ [no] snmp-server enable traps login-failure-mgr
Sends a trap for a failed login with a manager password.
loopback
■ snmp-server response-source loopback < 0 to 7 >
For the specied loopback interface, lexicographically minimum
congured ip address will be used as the source ip address in
the snmp response pdu.
Range: < 0 to 7 >
■ snmp-server trap-source loopback < 0 to 7 >
For the specied loopback interface, lexicographically minimum
congured ip address will be used as the source ip address in
the trap pdu.
531© 2008 Hewlett-Packard Development Company, L.P.
snmp-serverCommand Line Interface Reference Guide