Product manual

address

■ snmp-server host IP-ADDR

IP address of SNMP notication host.

address_ipv6

■ snmp-server host IPV6-ADDR

IPv6 address of SNMP notication host.

arp-protect

■ [no] snmp-server enable traps arp-protect

Sends a trap if ARP packets are received with an invalid source or destination

MAC address, and invalid IP address, or an invalid IP-to-MAC binding.

auth-server-fail

■ [no] snmp-server enable traps auth-server-fail

Sends a trap if the connection with a RADIUS or TACACS+ authentication server fails.

community

■ [no] snmp-server community COMMUNITY

Usage: [no] snmp-server community ASCII-STR

[manager|operator] [restricted|unrestricted]

Description: Add/delete SNMP community.

Parameters:

o community ASCII-STR - Enter up to 32 characters to name an SNMP

community.

o <manager|operator> - manager - the community can access all MIB

objects; operator (default) - the community can access all except

the CONFIG MIB.

o <restricted|unrestricted> - unrestricted - any MIB variable that

has read/write access can be set; restricted (default) - MIB

variables cannot be set, only read.

Next Available Options:

■ view < Operator | Manager > -- Add/delete SNMP community(p. 534)

■ write-access < Restricted | Unrestricted | | ... > -- Add/delete SNMP community(p. 534)

■ snmp-server host COMMUNITY

Name of the SNMP community (up to 32 characters).

contact

■ snmp-server contact CONTACT

Name of the switch administrator.

snmp-serverCommand Line Interface Reference Guide