Product manual

■ informs -- Specify if informs will be sent, rather than notifications. (p. 531)
■ retries < 0 to 255 > -- Specify the number of retries for informs. (p. 533)
■ timeout < 1 to 21474836 > -- Specify the interval between retries for informs, in seconds.
(NUMBER) (p. 533)
■ snmp-server location -- Description of the switch location. (ASCII-STR) (p. 531)
■ snmp-server mib -- Enable/Disable SNMP support for the hpSwitchAuthentication MIB (p. 532)
■ hpSwitchAuthMIB -- Enable/Disable SNMP support for the hpSwitchAuthentication MIB (p.
530)
■ excluded -- Disables SNMP support for the hpSwitchAuthentication MIB. (p. 529)
■ included -- Enables SNMP support for the hpSwitchAuthentication MIB. (p. 530)
■ [no] snmp-server response-source -- Specify the source ip-address policy for the response pdu
(p. 532)
■ dst-ip-of-request -- Destination Ip address of the snmp request pdu will be used as the source
ip address in the snmp response pdu. (p. 529)
■ ip-addr -- IP Address for the source ip address field in the snmp response pdu. (IP-ADDR) (p.
531)
■ loopback < 0 to 7 > -- For the specified loopback interface, lexicographically minimum
configured ip address will be used as the source ip address in the snmp response pdu. (p. 531)
■ [no] snmp-server trap-source -- Specify the source ip-address policy for the trap pdu (p. 534)
■ ip-addr -- IP Address for the source ip address field in the trap pdu. (IP-ADDR) (p. 531)
■ loopback < 0 to 7 > -- For the specified loopback interface, lexicographically minimum
configured ip address will be used as the source ip address in the trap pdu. (p. 531)
EXAMPLES
Example: snmp-server community
Add the following communities:
Type of AccessAccess LevelCommunity
managerred-team ■ Access to all MIB objects
■ unrestricted (read/write)
operatorblue-team ■ Access to all MIB objects
except the CONFIG MIB
■ restricted (read-only)
ProCurve(cong)# snmp-server community red-team manager unrestricted
ProCurve(cong)# snmp-server community blue-team operator restricted
COMMAND DETAILS
password-change-mgr (p. 532)extended (p. 529)address (p. 528)
port-security (p. 532)host (p. 529)address_ipv6 (p. 528)
response-source (p. 532)hpSwitchAuthMIB (p. 530)arp-protect (p. 528)
retries (p. 533)included (p. 530)auth-server-fail (p. 528)
snmp-authentication (p. 533)informs (p. 531)community (p. 528)
standard (p. 533)ip-addr (p. 531)contact (p. 528)
timeout (p. 533)link-change (p. 531)dhcp-snooping (p. 529)
traps (p. 533)location (p. 531)dst-ip-of-request (p. 529)
trap-source (p. 534)login-failure-mgr (p. 531)enable (p. 529)
view (p. 534)loopback (p. 531)events (p. 529)
write-access (p. 534)mib (p. 532)excluded (p. 529)
527© 2008 Hewlett-Packard Development Company, L.P.
snmp-serverCommand Line Interface Reference Guide