Product manual

to use, if the primary authentication
method is not able to check user's
credentials.
Use <TAB> or <?> after you specify the
primary authentication method to get a list
of all available backup methods.
Next Available Options:
■ enable -- Configure access to the privileged mode commands.(p. 33)
■ login -- Configure login access to the switch.(p. 35)
ssl-login
■ [no] aaa port-access web-based [ETHERNET] PORT-LIST ssl-login
Set whether to enable SSL login (https on port 443) (default disabled).
start-period
■ aaa port-access supplicant [ETHERNET] PORT-LIST start-period < 1 to 300 >
Set a period of time between EAPOL-Start packet retransmission
(default 30sec.).
Range: < 1 to 300 >
supplicant
■ [no] aaa port-access supplicant [ETHERNET] PORT-LIST
Usage: [no] aaa port-access supplicant [ethernet] PORT-LIST
[auth-timeout <1-300> | held-period <0-65535> |
start-period <1-300> | max-start <1-10> |
identity <identity> [secret] | secret
initialize | reauthenticate | clear-statistics]
Description: Manage 802.1X (Port Based Network Access) supplicant
on the device ports. Called without the optional parameters
the command enables or disables (if 'no' is specied) the
supplicant functionality on the specied ports.
The 'no' keyword can not be used with any of the
optional parameters. All changes made by the command apply
to the specied PORT-LIST only.
o 'auth-timeout' sets the period of time the supplicant waits
to receive a challenge from the authenticator
(default 30sec.).
o 'held-period' sets a period of time the supplicant waits
after receiving a failure before trying to re-acquire the
authenticatior (default 60sec.).
o 'start-period' sets a period of time between transmitting
EAPOL-Start packets in Connecting state (default 30sec.).
o 'max-start' denes the maximum number of attempts to
start authentication before the supplicant assumes that
it has been authenticated (default 3).
o 'identity' sets the identity to be used by the port
supplicant when MD5 authentication request is received
from an authenticator.
o 'secret' sets the secret to be used by the port
supplicant when MD5 authentication request is received
50© 2008 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide