Product manual

traps
■ show ip ospf traps
Usage: show ip ospf traps
Description: Show OSPF traps enabled on the device.
■ show snmp-server traps
Show all congured traps.
■ show spanning-tree traps
Show spanning tree trap information.
trunks
■ show trunks
Usage: show trunks [[ethernet] PORT-LIST]
Description: Show a list of ports and the trunks to which they belong.
If a PORT-LIST is supplied the command shows only the ports
specied.
Next Available Option:
■ port-list -- Show the trunk information only for the ports specified. ([ethernet] PORT-LIST) (p.
496)
type
■ show ip ospf link-state type < router | network | summary | ... >
Show LSAs of the specied type only.
Supported Values:
■ router -- Show router links only.
■ network -- Show network links only.
■ summary -- Show summary links only.
■ as-summary -- Show Autonomous System summary links only.
■ external -- Show Autonomous System external links only.
■ multicast -- Show multicast links only.
■ nssa -- Show NSSA external links only.
■ show ip route < static | connected | rip | ... >
Specify type of routes to display.
Supported Values:
■ static -- Show static routes only.
■ connected -- Show the switch's interface routes only.
■ rip -- Show RIP routes only.
■ ospf -- Show OSPF routes only.
■ show ipv6 route < connected >
Specify type of routes to display.
Supported Values:
515© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide