Product manual
Description: Show the stack status of this switch. The 'candidate' and
'view' commands are available on the stack commander only.
o candidates - show the list of devices that are stack candidates.
o view - show the list of devices that are stack members.
o all - show information about all the stacks available on the LAN.
Next Available Options:
■ candidates -- Show the list of devices that are stack candidates.(p. 459)
■ view -- Show the list of devices that are stack members.(p. 517)
■ all -- Show information about all the stacks available on the LAN.(p. 453)
static
■ show ip pim rp-set static
Show statically congured RP-Set information.
static-mac
■ show static-mac
Usage: show static-mac
Description: Show the locked-down MAC addresses in all vlans.
The list is sorted by VLAN, then MAC address.
statistics
■ show arp-protect statistics VLAN-ID-RANGE
■ show ipv6 mld vlan VLAN-ID statistics
Show MLD VLAN statistics
■ show ipv6 mld statistics
Show MLD statistics.
■ show link-keepalive statistics
show detailed statistics for all link-keepalive enabled ports.
■ show port-access authenticator [ETHERNET] PORT-LIST statistics
Show authentication sessions statistics for 802.1X authenticator.
■ show port-access authenticator statistics
Show authentication sessions statistics for 802.1X authenticator.
■ show port-access supplicant statistics
Show authentication sessions statistics for 802.1X supplicant.
■ show port-access [ETHERNET] PORT-LIST authenticator statistics
Show authentication sessions statistics for 802.1X authenticator.
510© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide