Product manual

Description: Show a table of source-port lter names
with the associated source ports and actions
spanning-tree
■ show spanning-tree
Usage: show spanning-tree [[ethernet] PORT-LIST] [cong|detail]
show spanning-tree [[ethernet] PORT-LIST] instance <ist|INSTANCE-ID>
[detail]
show spanning-tree [mst-cong] |
[cong [instance <ist|INSTANCE-ID>]] |
[root-history <cst|ist|msti <INSTANCE-ID>>] |
[debug-counters [instance <INSTANCE-ID>] |
[ports <PORT_LIST>]]
Description: Show spanning tree information.
When executed without parameters, the command shows spanning
tree status information. If PORT-LIST is specied, the
command shows spanning tree status information only for the
ports listed. If the 'cong' keyword is specied the spanning
tree conguration information is shown. If the 'detail' keyword
is specied, extended port, cost, and BPDU information is shown.
The second and third forms of the command can be used to show
MSTP specic information. Use the 'show spanning-tree ?'
command to see all available parameters with description.
Next Available Options:
■ port-list -- Limit the port information printed to the set of the specified ports. ([ethernet]
PORT-LIST) (p. 496)
■ detail -- Show spanning tree extended details Port, Bridge, Rx, and Tx report.(p. 467)
■ config -- Show spanning tree configuration information.(p. 462)
■ instance -- Show the spanning tree instance information.(p. 477)
■ mst-config -- Show multiple spanning tree region configuration.(p. 491)
■ pending -- Show spanning tree pending configuration(p. 495)
■ root-history -- Show spanning tree Root changes history information.(p. 504)
■ debug-counters -- Show spanning tree debug counters information.(p. 467)
■ traps -- Show spanning tree trap information.(p. 515)
■ bpdu-protection -- Show spanning tree BPDU protection status information.(p. 458)
■ pvst-filter -- Show spanning tree PVST filter status information.(p. 499)
■ pvst-protection -- Show spanning tree PVST protection status information.(p. 499)
ssh
■ show ip ssh
Usage: show ip ssh
Description: Show both current SSH conguration and the status of active
connections.
stack
■ show stack
Usage: show stack [candidates|view|all]
509© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide