Product manual
Usage: show power-over-ethernet [slot] <slotID>
Description: Show poe information of specied slot.
snmp-server
■ show snmp-server
Usage: show snmp-server [COMMUNITY-STR]
show snmp-server traps
Description: Display information on all SNMP communities, trap receivers and
Snmp response/trap source-ip policy congured on the switch. If
'COMMUNITY-STR' is specied, only information for that community
is displayed.
Next Available Options:
■ traps -- Show all configured traps.(p. 515)
■ community -- Specify SNMP community to which to restrict the output. (ASCII-STR) (p. 461)
snmpv3
■ show snmpv3
Show conguration of SNMPv3 features.
Next Available Options:
■ access-rights -- Show information about access rights. (p. 452)
■ community -- Show SNMPv3 Community table. (p. 461)
■ enable -- Show SNMPv3 status. (p. 470)
■ engineid -- Show switch's SNMP engineId. (p. 470)
■ group -- Show SNMPv3 User to Group mappings. (p. 473)
■ notify -- Show SNMPv3 notification table. (p. 493)
■ only -- Show SNMP message reception policy. (p. 493)
■ params -- Show SNMPv3 Target Parameters table. (p. 494)
■ restricted-access -- Show SNMPv1 and SNMPv2c access properties. (p. 503)
■ targetaddress -- Show SNMPv3 Target Address table. (p. 513)
■ user -- Show SNMPv3 users. (p. 516)
■ view -- Show views. (p. 517)
sntp
■ show sntp
Usage: show sntp
Description: Show congured time protocol and servers.
source-port
■ show filter source-port
Usage: show lter source-port
508© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide