Product manual

running-config

■ show running-config

Usage: show running-cong [status]

Description: Show the switch running conguration. If the status

keyword is specied check if there are changes in running

conguration not saved to startup conguration le.

Next Available Option:

■ status -- Check if the running configuration differs from the statup configuration.(p. 511)

sampling-polling

■ show sflow < 1 to 3 > sampling-polling

Displays information about sampling and polling.

Next Available Option:

■ port-list -- Displays information about sampling and polling. ([ethernet] PORT-LIST) (p. 496)

sec-model

■ show snmpv3 access-rights < ManagerPriv | ManagerAuth | OperatorAuth | ... > sec-model

Set security model.

Next Available Options:

■ ver1-2c < ver1 | ver2c > -- Configure SNMPv3 User entry.(p. 516)

■ ver3 -- SNMP version 3 security model.(p. 517)

■ show snmpv3 group < ManagerPriv | ManagerAuth | OperatorAuth | ... > user USER sec-model

< ver1 | ver2c | ver3 >

Show a specic security model.

Supported Values:

■ ver1 -- SNMP version 1 security model.

■ ver2c -- SNMP version v2c security model.

■ ver3 -- SNMP version 3 security model.

sequence-number

■ show ip ospf external-link-state sequence-number INTEGER

Show LSAs with the specied sequence number only.

■ show ip ospf link-state sequence-number INTEGER

Show LSAs with the specied sequence number only.

session-counters

■ show port-access authenticator [ETHERNET] PORT-LIST session-counters

Show 802.1X current (or last if no current sessions open) sessions counters.

showCommand Line Interface Reference Guide