Product manual
router-id
■ show ip ospf external-link-state router-id IP-ADDR
Show LSAs with the specied Router ID only.
■ show ip ospf link-state router-id IP-ADDR
Show LSAs with the specied Router ID only.
routers
■ show ipv6 routers
Usage: show ipv6 routers vlan <VLANID>
Description: Show the IPv6 Router table entries.
Next Available Option:
■ vlan -- Show the IPv6 Router Table Entries for VLAN.(p. 518)
rp-candidate
■ show ip pim rp-candidate
Usage: show ip pim rp-candidate [cong]
Description: Show Candidate-RP operational and conguration information.
When invoked without parameter shows current operational status
of the Candidate-RP.
Next Available Option:
■ config -- Show C-RP configuration information. (p. 462)
rp-pending
■ show ip pim rp-pending
Show (*,*,RP) Join Pending Information.
rp-set
■ show ip pim rp-set
Usage: show ip pim rp-set [static|learned]
Description: Show RP-Set information available on the router.
When invoked without parameters shows all statically congured
and dynamically learned entries. If keyword 'static' is specied
the information about statically congured entries is shown.
If keyword 'learned' is specied the information learned from
the BSR is shown.
Next Available Options:
■ static -- Show statically configured RP-Set information. (p. 510)
■ learned -- Show RP-Set information learned from the BSR. (p. 484)
505© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide