Product manual

root-history
■ show spanning-tree root-history
Show spanning tree Root changes history information.
Next Available Options:
■ cst -- Show CST Root changes history.(p. 466)
■ ist -- Show IST Regional Root changes history.(p. 483)
■ msti < 1 to 16 > -- Show MSTI Regional Root changes history. (NUMBER) (p. 491)
Example 2. Example of the show root-history Command
ProCurve(cong)# show spanning-tree root-history ist
Status and Counters - IST Regional Root Changes History
MST Instance ID : 0
Root Changes Counter : 1
Current Root Bridge ID : 32768:001659-9d0f00
Root Bridge ID Date Time
------------------- -------- --------
32768:001659-9d0f00 01/02/90 00:07:23
route
■ show ip route
Usage: show ip route [IP-ADDR] [static|connected|rip|ospf]
Description: Show the IP routing table.
The output may be restricted to a specic destination or
type of route.
Next Available Options:
■ ip-addr -- Destination IP address to display the routes to. (IP-ADDR) (p. 481)
■ type < static | connected | rip | ... > -- Specify type of routes to display.(p. 515)
■ show ipv6 route
Usage: show ipv6 route [IPV6-ADDR] [connected]
Description: Show the IPv6 routing table.
The output may be restricted to a specic destination or
type of route.
Next Available Options:
■ ipv6-addr -- Destination IPv6 address to display the routes to. (IPV6-ADDR) (p. 482)
■ type < connected > -- Specify type of routes to display.(p. 515)
■ show tech route
Usage: show tech [all|buffers|mesh|route|statistics]
Description: Display output of a predened command sequence used by
technical support.
504© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide