Product manual

Usage: show radius [authentication|accounting|dyn-authorization|host <IP-ADDR>]
Description: Show RADIUS status and statistics information. Invoked without
parameters shows general RADIUS conguration for the switch.
o authentication - show RADIUS authentication statistics information.
o accounting - show RADIUS accounting statistics information.
o dyn-authorization - show RADIUS dynamic authorization statistics
information.
o host <IP-ADDR> - show comprehensive statistics information for the
host.
Next Available Options:
■ authentication -- Show RADIUS authentication statistics(p. 454)
■ accounting -- Show RADIUS accounting statistics(p. 452)
■ dyn-authorization -- Show RADIUS dynamic authorization statistics(p. 470)
■ host -- Show statistics information for the RADIUS host (IP-ADDR) (p. 475)
rate-limit
■ show rate-limit
Usage: show rate-limit <all|icmp> [PORT-LIST]
Description: Show rate limit maximum percentages. If PORT-LIST parameter is
specied, information is shown only for the specied ports.
Use 'all' to show limits applied to all trafc, or 'icmp' to
show limits for ICMP trafc only.
Next Available Options:
■ icmp -- Show only limits for icmp traffic.(p. 476)
■ all -- Show limits for all traffic.(p. 453)
■ ip -- ip help(p. 480)
receiver-index
■ show sflow < 1 to 3 >
Select one of the three possible sFlow receiver tables.
Range: < 1 to 3 >
Next Available Options:
■ destination -- Displays information about the receiver/collector/management-station to which
the sampling-polling data is sent.(p. 467)
■ sampling-polling -- Displays information about sampling and polling.(p. 506)
redistribute
■ show ip ospf redistribute
501© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide