Product manual

every 5 minutes, hour, or day, averages and min/max values are calculated
and the current interval's data is copied to the previous interval's data.
For example, the previous day's data is updated at midnight local time. The
previous hour's data is updated on the hour.
There are many situations in which data is not yet available, or data is
not maintained. In this case, an asterisk is displayed. It is never an
error condition.
Next Available Option:
■ configuration -- show configured thresholds for monitored parameters(p. 465)
■ show monitor
Usage: show monitor
Description: Show the switch network monitoring status and
conguration, if network monitoring is enabled.
Next Available Options:
■ mirror_session_id < 1 to 4 > -- Mirror destination number.(p. 489)
■ name -- Mirror destination name.(p. 492)
■ endpoint -- Remote mirroring destination configuration.(p. 470)
motd
■ show banner motd
Usage: show banner motd
Description: show the congured banner text.
mroute
■ show ip mroute
Usage: show ip mroute [command]
Description: Show IP multicast routing table. The 'command' can be used to
obtain more detailed information of the IP multicast routing
functionality. Use 'show ip mroute ?' to get a list of all
possible commands.
Next Available Options:
■ IP-ADDR -- Show detailed information for the specified entry from the IP multicast routing table
(IP-ADDR) (p. 481)
■ interface -- Show IP multicast routing interfaces' information(p. 479)
■ show ip pim mroute
Usage: show ip pim mroute [GRP-ADDR SRC-ADDR]
Description: Show PIM-specic information from the IP multicast routing
table. Invoked without parameters shows all PIM entries from
the IP MRT. If multicast group address and source address are
490© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide