Product manual

Usage: show mesh

Description: Show the switch mesh information such as mesh

ports, adjacent switches and their peer ports.

■ show tech mesh

Usage: show tech [all|buffers|mesh|route|statistics]

Description: Display output of a predened command sequence used by

technical support.

mirror_session_id

■ show monitor < 1 to 4 >

Mirror destination number.

Range: < 1 to 4 >

mld

■ show ipv6 mld

Usage: show ipv6 mld [cong|group IPV6-ADDR|VLAN-ID [cong]]

Description: Invoked without any parameters, shows per-VLAN MLD status,

or, if VLANs are disabled displays the global MLD status.

When followed by the 'cong' keyword, shows MLD global

conguration information. VLAN-ID can be used to get

operational and conguration information for a particular

VLAN, if VLAN support is enabled. The 'group' keyword can be

used to show a list of ports where a particular multicast group

is registered.

Next Available Options:

■ vlan -- Show MLD VLAN information.(p. 518)

■ config -- Show MLD configuration information.(p. 462)

■ statistics -- Show MLD statistics.(p. 510)

modules

■ show modules

Usage: show modules

Description: Show installed modules information

monitor

■ show instrumentation monitor

Usage: show instrumentation monitor

Description: Show latest values for monitored parameters.

The data displayed is dependent on which version of code is running.

Data is maintained for the current 5 minutes, hour, and day. At the end of

showCommand Line Interface Reference Guide