Product manual

■ show ip mroute IP-ADDR IP-ADDR

Specify the source IP address of the MRT entry.

■ show ip pim mroute IP-ADDR

Specify the IP multicast group address of the MRT entry.

Next Available Option:

■ IP-ADDR -- Specify the source IP address of the MRT entry. (IP-ADDR) (p. 481)

■ show ip pim mroute IP-ADDR IP-ADDR

Specify the source IP address of the MRT entry.

■ show ip pim neighbor IP-ADDR

Specify the IP address of the PIM neighbor to show.

ip-recv-mac-address

■ show ip-recv-mac-address

Show VLAN L3-Mac-Address table.

ipv6

■ show ipv6

Usage: show ipv6

Description: Show the device IPv6 conguration. Invoked without parameters

shows IPv6 conguration for the switch or all VLANs. When

followed by a parameter displays information for a particular

IPv6 protocol or feature. To get a list of all possible

parameters use 'show ipv6 ?'.

Next Available Options:

■ vlan -- Show IPv6 status information for all VLANs(p. 518)

■ routers -- Show the IPv6 Router table entries(p. 505)

■ route -- Show the IPv6 routing table(p. 504)

■ mld -- Invoked without any parameters, shows per-VLAN MLD status, or, if VLANs are disabled

displays the global MLD status(p. 489)

■ neighbors -- Displays information on the IPv6 neighbor discovery cache(p. 492)

■ authorized-managers -- Show IPV6 addresses allowed to manage the switch(p. 455)

ipv6-addr

■ show ipv6 route IPV6-ADDR

Destination IPv6 address to display the routes to.

■ show ipv6 mld vlan VLAN-ID group IPV6-ADDR

Show MLD VLAN group address information.

showCommand Line Interface Reference Guide