Product manual

Usage: show ip [...]
Description: Show the device IP conguration. Invoked without parameters
shows IP conguration for the switch or all VLANs. When
followed by a parameter displays information for a particular
IP protocol or feature. To get a list of all possible
parameters use 'show ip ?'.
Next Available Options:
■ authorized-managers -- Show IPV4 addresses allowed to manage the switch(p. 455)
■ dns -- Show configured DNS server IP addresses on the switch(p. 469)
■ client-public-key -- Show currently loaded public keys for authorized clients (NUMBER) (p. 459)
■ helper-address -- Show DHCP servers where DHCP requests received by the switch are to be
forwarded(p. 475)
■ forward-protocol -- Show server addresses where broadcast requests received by the switch
are to be forwarded based on configured port(p. 472)
■ icmp -- Show ICMP Rate Limiting settings(p. 476)
■ host-public-key -- Display the SSH host RSA public key (NUMBER) (p. 475)
■ igmp -- Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are disabled
displays the global IGMP status(p. 476)
■ irdp -- Show IRDP (ICMP Router Discovery Protocol) settings(p. 483)
■ ospf -- Show OSPF operational and configuration information(p. 493)
■ rip -- Show RIP operational and configuration information(p. 503)
■ route -- Show the IP routing table(p. 504)
■ ssh -- Show both current SSH configuration and the status of active connections(p. 509)
■ mroute -- Show IP multicast routing table(p. 490)
■ pim -- Show PIM protocol operational and configuration information(p. 495)
■ show rate-limit ip
ip help
Next Available Option:
■ access-group -- access-group(p. 451)
ip-addr
■ show ip route IP-ADDR
Destination IP address to display the routes to.
IP-ADDR
■ show ip mroute IP-ADDR
Usage: show ip mroute [GRP-ADDR SRC-ADDR]
Description: Show detailed information for the specied entry from the IP
multicast routing table. GRP-ADDR is the IP multicast group
address and SRC-ADDR is the source IP address of the entry.
Next Available Option:
■ IP-ADDR -- Specify the source IP address of the MRT entry. (IP-ADDR) (p. 481)
481© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide