Product manual

ManualsBrandsProCurve ManualsComputer equipment8212zl

481

482

483

484

485

486

487

488

489

490

Usage: show instrumentation

Description: Show internal version-dependant counters for debugging.

This data is for factory troubleshooting purposes. The data displayed

is dependent on which version of code is running.

Data is maintained for the current 5 minutes, hour, and day. At the end of

every 5 minutes, hour, or day, averages and min/max values are calculated

and the current interval's data is copied to the previous interval's data.

For example, the previous day's data is updated at midnight local time. The

previous hour's data is updated on the hour.

There are many situations in which data is not yet available, or data is

not maintained. In this case, an asterisk is displayed. It is never an

error condition.

Next Available Option:

■ monitor -- Show latest values for monitored parameters(p. 489)

■ show tech instrumentation

Usage: show tech [all|buffers|mesh|route|statistics]

Description: Display output of a predened command sequence used by

technical support.

interface

■ show ip ospf interface

Usage: show ip ospf interface [IP-ADDR|vlan VLAN-ID]

Description: Show OSPF interfaces' information. Invoked without

parameters shows all OSPF interfaces congured. If the

'IP-ADDR' or the VLAN is specied detailed information

for the interface determined through the parameter is shown.

Next Available Options:

■ vlan -- Specify VLAN of the interface for which to show detailed information. (VLAN-ID) (p. 518)

■ if-ip -- Specify IP address of the interface for which to show detailed information. (IP-ADDR)

(p. 476)

■ show ip rip interface

Usage: show ip rip interface [IP-ADDR|vlan VLAN-ID]

Description: Show RIP interfaces' information. Invoked without

parameters shows all RIP interfaces congured. If the