Product manual

■ fingerprint -- Display hexadecimal hash.(p. 472)

icmp

■ show ip icmp

Usage: show ip icmp

Description: Show ICMP Rate Limiting settings.

■ show rate-limit icmp

Show only limits for icmp trafc.

Next Available Option:

■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p. 496)

if-ip

■ show ip ospf interface IP-ADDR

Specify IP address of the interface for which to show detailed information.

■ show ip rip interface IP-ADDR

Specify IP address of the interface for which to show detailed information.

igmp

■ show igmp

Usage: show igmp [...]

Description: Show global switch IGMP conguration parameters.

To get a list of all possible parameters use 'show igmp ?'.

Next Available Option:

■ delayed-flush -- Shows switch-wide IGMP delayed flush value(p. 467)

■ show ip igmp

Usage: show ip igmp [cong|group IP-ADDR|VLAN-ID [cong]]

Description: Invoked without any parameters, shows per-VLAN IGMP status,

or, if VLANs are disabled displays the global IGMP status.

When followed by the 'cong' keyword, shows IGMP global

conguration information. VLAN-ID can be used to get

operational and conguration information for a particular

VLAN, if VLAN support is enabled. The 'group' keyword can be

used to show a list of ports where a particular multicast group

is registered.

Next Available Options:

■ vlan -- Show IGMP operational information for the VLAN specified. (VLAN-ID) (p. 518)

■ config -- Show IGMP configuration information.(p. 462)

■ group -- Show ports the specified multicast group address is registered on. (IP-ADDR) (p. 473)

showCommand Line Interface Reference Guide