Product manual

external-link-state

■ show ip ospf external-link-state

Usage: show ip ospf external-link-state [status|advertise]

Description: Show the Link State Advertisements from throughout

the areas to which the device is attached. The command

shows only External Link State Advertisements.

The 'status' keyword is optional and does not affect the

command output. If the 'advertise' is specied, each LSA

is shown as a stream of bytes in hexadecimal notation.

Next Available Options:

■ status -- The keyword is optional and can be omitted.(p. 511)

■ advertise -- Show each LSA as a stream of bytes in hexadecimal notation.(p. 452)

■ link-state-id -- Show LSAs with the specified ID only. (IP-ADDR) (p. 485)

■ router-id -- Show LSAs with the specified Router ID only. (IP-ADDR) (p. 505)

■ sequence-number -- Show LSAs with the specified sequence number only.(p. 506)

fans

■ show system fans

Usage: show system fans

Description: Show system fan status.

fastboot

■ show fastboot

Usage: show fastboot

Description: Shows the current status of fastboot on switch.

fault-finder

■ show fault-finder

Usage: show fault-nder

Description: Show the fault-nder table.

filename

■ show config < config | new >

Display specied conguration.

Supported Values:

■ config

■ new

files

■ show config files

List saved conguration les.

showCommand Line Interface Reference Guide