Product manual

Show each LSA as a stream of bytes in hexadecimal notation.

■ show ip ospf link-state advertise

Show each LSA as a stream of bytes in hexadecimal notation.

agent

■ show sflow agent

Displays read-only switch agent information: The agent address is normally the ip

address of the rst vlan congured.

all

■ show rate-limit all

Show limits for all trafc.

Next Available Option:

■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p. 496)

■ show stack all

Show information about all the stacks available on the LAN.

■ show tech all

Usage: show tech [all|buffers|mesh|route|statistics]

Description: Display output of a predened command sequence used by

technical support.

all-hosts

■ show connection-rate-filter all-hosts

Show blocked and throttled IP addresses.

area

■ show ip ospf area

Usage: show ip ospf area [OSPF-AREA-ID]

Description: Show OSPF areas congured on the device. Invoked without

parameters displays all OSPF areas congured. If the

'OSPF-AREA-ID' is specied detailed information for

the correspondent OSPF area is shown.

Next Available Option:

■ area-ip -- (OSPF-AREA-ID) (p. 454)

■ show ip ospf virtual-neighbor area OSPF-AREA-ID

Specify area of the virtual neighbors to show.

showCommand Line Interface Reference Guide