Product manual
■ auth-server -- Show the authentication server-related configuration items. (p. 456)
■ detailed -- Show the detailed configuration of Web Authentication. (p. 468)
■ web-server -- Show the web server-related configuration items. (p. 523)
■ auth-server -- Show the authentication server-related configuration items. (p. 456)
■ web-server -- Show the web server-related configuration items. (p. 523)
■ show port-security -- Show a table describing port security settings (p. 498)
■ intrusion-log -- Show the intrusion log records. (p. 480)
■ port-list -- Show a table describing port security settings ([ethernet] PORT-LIST) (p. 496)
■ show power-over-ethernet -- Show port poe configuration and status information (p. 499)
■ brief -- Show summary of poe status (p. 458)
■ port-list -- Show the ports' poe status ([ethernet] PORT-LIST) (p. 496)
■ slot -- Show summary of poe status (SLOT-ID-RANGE) (p. 507)
■ port-list -- Show the ports' poe status ([ethernet] PORT-LIST) (p. 496)
■ slot -- Show poe information of specified slot (SLOT-ID-RANGE) (p. 507)
■ show qinq -- show qinq configuration details (p. 500)
■ show qos -- Show various QoS settings (p. 500)
■ device-priority -- Show the device priority table (priority based on the IP addresses) (p. 469)
■ dscp-map -- Show mappings between DSCP policy and 802.1p priority. (p. 470)
■ port-priority -- Show the port-based priority table (p. 497)
■ protocol-priority -- Show the protocol priority (p. 499)
■ queue-config -- Displays outbound port queues configuration information. (p. 500)
■ resources -- Show the qos resources (p. 502)
■ tcp-udp-port-priority -- Show TCP/UDP port priorities (p. 513)
■ type-of-service -- Show QoS priorities based on IP Type-of-Service (p. 516)
■ vlan-priority -- Show the VLAN-based priority table (p. 521)
■ show radius -- Show RADIUS status and statistics information (p. 500)
■ accounting -- Show RADIUS accounting statistics (p. 452)
■ authentication -- Show RADIUS authentication statistics (p. 454)
■ dyn-authorization -- Show RADIUS dynamic authorization statistics (p. 470)
■ host -- Show statistics information for the RADIUS host (IP-ADDR) (p. 475)
■ dyn-authorization -- (p. 470)
■ show rate-limit -- Show rate limit maximum percentages (p. 501)
■ all -- Show limits for all traffic. (p. 453)
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.
496)
■ icmp -- Show only limits for icmp traffic. (p. 476)
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.
496)
■ ip -- ip help (p. 480)
■ access-group -- access-group (p. 451)
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.
496)
■ show redundancy -- Display redundant information for Management and Fabric Modules (p. 502)
■ show rmon -- Show detailed rmon statistics for the ports (p. 503)
■ statistics -- Show RMON statistics for the ports ([ethernet] PORT-LIST) (p. 510)
■ show running-config -- Show the switch running configuration (p. 506)
■ status -- Check if the running configuration differs from the statup configuration. (p. 511)
■ show sflow -- Display information regarding the configuration, sampling, and polling with respect
to 'sflow' (p. 507)
■ agent -- Displays read-only switch agent information: The agent address is normally the ip
address of the first vlan configured. (p. 453)
■ receiver-index < 1 to 3 > -- Select one of the three possible sFlow receiver tables. (NUMBER)
(p. 501)
444© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide