Product manual

■ peer -- Show RIP peers (p. 494)
■ peer-ip -- Specify IP address of the RIP peer to show. (IP-ADDR) (p. 494)
■ redistribute -- List protocols which are being redistributed into RIP (p. 501)
■ restrict -- List routes which will not be redistributed via RIP (p. 503)
■ route -- Show the IP routing table (p. 504)
■ ip-addr -- Destination IP address to display the routes to. (IP-ADDR) (p. 481)
■ type < static | connected | rip | ... > -- Specify type of routes to display. (p. 515)
■ ssh -- Show both current SSH configuration and the status of active connections (p. 509)
■ show ip-recv-mac-address -- Show VLAN L3-Mac-Address table. (p. 482)
■ show ipv6 -- Show the device IPv6 configuration (p. 482)
■ authorized-managers -- Show IPV6 addresses allowed to manage the switch (p. 455)
■ mld -- Invoked without any parameters, shows per-VLAN MLD status, or, if VLANs are disabled
displays the global MLD status (p. 489)
■ config -- Show MLD configuration information. (p. 462)
■ statistics -- Show MLD statistics. (p. 510)
■ vlan -- Show MLD VLAN information. (p. 518)
■ vlan-id -- Show MLD operational information for the VLAN specified. (VLAN-ID) (p. 520)
■ config -- Show MLD configuration information for the VLAN specified. (p. 462)
■ counters -- Show MLD VLAN counter information. (p. 465)
■ group -- Show MLD VLAN group info. (p. 473)
■ ipv6-addr -- Show MLD VLAN group address information. (IPV6-ADDR) (p. 482)
■ statistics -- Show MLD VLAN statistics (p. 510)
■ neighbors -- Displays information on the IPv6 neighbor discovery cache (p. 492)
■ vlan -- Displays information on the IPv6 neighbor discovery cache (p. 518)
■ vlan -- Show IPv6 information for the VLAN with the ID supplied. (VLAN-ID) (p. 518)
■ route -- Show the IPv6 routing table (p. 504)
■ ipv6-addr -- Destination IPv6 address to display the routes to. (IPV6-ADDR) (p. 482)
■ type < connected > -- Specify type of routes to display. (p. 515)
■ routers -- Show the IPv6 Router table entries (p. 505)
■ vlan -- Show the IPv6 Router Table Entries for VLAN. (p. 518)
■ vlan -- Show IPv6 information for the VLAN with the ID supplied. (VLAN-ID) (p. 518)
■ vlan -- Show IPv6 status information for all VLANs (p. 518)
■ vlan -- Show IPv6 information for the VLAN with the ID supplied. (VLAN-ID) (p. 518)
■ show jumbos -- Show the untagged Max frame size for the switch (p. 483)
■ show key-chain -- Display key chains (p. 483)
■ CHAIN-NAME -- Show the chain detailed information. (ASCII-STR) (p. 459)
■ show lacp -- Show status of LACP trunks (p. 484)
■ show licenses -- Display license status for premium features (p. 484)
■ uninstalled -- Display verification key for features which have been uninstalled. (p. 516)
■ show link-keepalive -- show link-keepalive information on the switch (p. 485)
■ statistics -- show detailed statistics for all link-keepalive enabled ports. (p. 510)
■ show lldp -- Show various LLDP settings (p. 485)
■ auto-provision -- Show LLDP auto-provision related info for radio-ports (p. 456)
■ radio-ports -- Show LLDP radio-ports information. (p. 500)
■ config -- Show LLDP configuration information (p. 462)
■ port-list -- Specify the port or list of ports. ([ethernet] PORT-LIST) (p. 496)
■ info -- Show LLDP information about the remote or local device (p. 477)
■ local-device -- Show LLDP local device information. (p. 486)
■ port-list -- Show remote or local device information for the specified ports. ([ethernet]
PORT-LIST) (p. 496)
■ remote-device -- Show LLDP remote device information. (p. 502)
■ port-list -- Show remote or local device information for the specified ports. ([ethernet]
PORT-LIST) (p. 496)
441© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide