Product manual

monitor -- Show latest values for monitored parameters (p. 489)■
■ configuration -- show configured thresholds for monitored parameters (p. 465)
■ show interfaces -- Show port configuration and status information (p. 480)
■ brief -- Show the ports' operational parameters (p. 458)
■ port-list -- Show summary of network traffic handled by the ports ([ethernet] PORT-LIST)
(p. 496)
■ config -- Show configuration information (p. 462)
■ port-list -- Show summary of network traffic handled by the ports ([ethernet] PORT-LIST) (p.
496)
■ hc -- Show summary of network traffic handled by the ports (p. 474)
■ port-utilization -- Show the ports' bandwidth-utilization (p. 498)
■ show ip -- Show the device IP configuration (p. 480)
■ authorized-managers -- Show IPV4 addresses allowed to manage the switch (p. 455)
■ client-public-key -- Show currently loaded public keys for authorized clients (NUMBER) (p. 459)
■ babble -- Display phonetic hash. (p. 457)
■ fingerprint -- Display hexadecimal hash. (p. 472)
■ dns -- Show configured DNS server IP addresses on the switch (p. 469)
■ forward-protocol -- Show server addresses where broadcast requests received by the switch
are to be forwarded based on configured port (p. 472)
■ vlan -- Specify a vlan for which to show server addresses. (VLAN-ID) (p. 518)
■ helper-address -- Show DHCP servers where DHCP requests received by the switch are to be
forwarded (p. 475)
■ vlan -- Specify a vlan for which to show server addresses. (VLAN-ID) (p. 518)
■ host-public-key -- Display the SSH host RSA public key (NUMBER) (p. 475)
■ babble -- Display phonetic hash. (p. 457)
■ fingerprint -- Display hexadecimal hash. (p. 472)
■ icmp -- Show ICMP Rate Limiting settings (p. 476)
■ igmp -- Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are disabled
displays the global IGMP status (p. 476)
■ config -- Show IGMP configuration information. (p. 462)
■ group -- Show ports the specified multicast group address is registered on. (IP-ADDR) (p.
473)
■ vlan -- Show IGMP operational information for the VLAN specified. (VLAN-ID) (p. 518)
■ config -- Show IGMP configuration information for the VLAN specified. (p. 462)
■ irdp -- Show IRDP (ICMP Router Discovery Protocol) settings (p. 483)
■ mroute -- Show IP multicast routing table (p. 490)
■ interface -- Show IP multicast routing interfaces' information (p. 479)
■ VLAN-ID -- Specify the VLAN ID of the IP multicast routing interface to show. (VLAN-ID)
(p. 520)
■ IP-ADDR -- Show detailed information for the specified entry from the IP multicast routing
table (IP-ADDR) (p. 481)
■ IP-ADDR -- Specify the source IP address of the MRT entry. (IP-ADDR) (p. 481)
■ ospf -- Show OSPF operational and configuration information (p. 493)
■ area -- Show OSPF areas configured on the device (p. 453)
■ area-ip -- (OSPF-AREA-ID) (p. 454)
■ external-link-state -- Show the Link State Advertisements from throughout the areas to
which the device is attached (p. 471)
■ advertise -- Show each LSA as a stream of bytes in hexadecimal notation. (p. 452)
■ link-state-id -- Show LSAs with the specified ID only. (IP-ADDR) (p. 485)
■ router-id -- Show LSAs with the specified Router ID only. (IP-ADDR) (p. 505)
■ sequence-number -- Show LSAs with the specified sequence number only. (p. 506)
■ status -- The keyword is optional and can be omitted. (p. 511)
■ general -- Show OSPF basic configuration and operational information (p. 473)
439© 2008 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide