Product manual

ManualsBrandsProCurve ManualsComputer equipment8212zl

431

432

433

434

435

436

437

438

439

440

show

OVERVIEW

Category:

operatorPrimary context:

Related Commands

Usage: show ...

Description: Display switch operation information.

The 'show' must be followed by a command.

Use 'show ?' for the list of all possible command.

COMMAND STRUCTURE

■ show access-list -- Show Access Control List information (p. 451)

■ acl-name -- Display detailed information on specified ACL. (ASCII-STR) (p. 452)

■ config -- Show all configured ACL's on the switch using the CLI syntax used to create them.

(p. 462)

■ config -- Show all configured ACL's on the switch using the CLI syntax used to create them.

(p. 462)

■ ports -- Show ACLs applied to the specified ports. ([ethernet] PORT-LIST) (p. 498)

■ radius -- Display ACLs applied via RADIUS. ([ethernet] PORT-LIST) (p. 500)

■ resources -- Display ACL Rules/Masks availability. (p. 502)

■ vlan -- Show ACLs applied to the specified VLAN. (VLAN-ID) (p. 518)

■ show accounting -- Show Accounting configuration parameters (p. 452)

■ sessions -- Show accounting data for all active sessions (p. 507)

■ show arp -- Show the IP ARP translation table (p. 454)

■ vlan -- Specify VLAN for which to show ARP entries. (VLAN-ID) (p. 518)

■ show arp-protect -- Display Dynamic ARP Protection information (p. 454)

■ statistics -- (VLAN-ID-RANGE) (p. 510)

■ show authentication -- Show Authentication configuration parameters (p. 454)

■ show authorization -- Show Authorization configuration parameters (p. 455)

■ show autorun -- Show Autorun configuration status. (p. 456)

■ show bandwidth -- Show queue percentages for outbound guaranteed minimum bandwidth (p.

457)

■ output -- Show outbound guaranteed minimum bandwidth. (p. 494)

■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.

496)

■ show banner -- show the configured banner text (p. 457)

■ motd -- show the configured banner text (p. 490)

■ show boot-history -- Display the system boot log (p. 458)

■ show cdp -- Show CDP configuration and neighbors discovered (p. 459)

■ neighbors -- Show CDP neighbors. See 'show cdp help' for details. (p. 492)

■ detail -- Show neighbor information field-per-line instead of shortened table format. (p. 467)

■ neighbors-port -- Show CDP neighbors on specified port only. ([ethernet] PORT-NUM) (p.

493)

■ show config -- Show the switch startup configuration (p. 462)

■ filename < config | new > -- Display specified configuration. (p. 471)

■ files -- List saved configuration files. (p. 471)

■ status -- Check if the running configuration differs from the statup configuration. (p. 511)