Product manual
Supported Values:
■ connected
■ static
■ rip
■ [no] router rip redistribute < connected | static | ospf >
Usage: [no] redistribute <static|connected|ospf>
Description: Specify source protocols which will be redistributed
into RIP. Use the [no] form of the command to disable
redistribution of the specied protocol.
o static -- redistribute manually congured routes.
o connected -- redistribute locally connected network(s).
o ospf -- redistribute OSPF routes.
Supported Values:
■ connected
■ static
■ ospf
restrict
■ router ospf restrict
Usage: [no] restrict IP-ADDR/MASK-LEN
Description: Prevent redistribution of routes via OSPF.
Next Available Option:
■ ip-addr -- Prevent redistribution of routes via OSPF (IP-ADDR/MASK-LENGTH) (p. 416)
■ router rip restrict
Usage: [no] restrict IP-ADDR/MASK-LEN
Description: Prevent redistribution of routes via RIP.
Next Available Option:
■ ip-addr -- Prevent redistribution of routes via RIP (IP-ADDR/MASK-LENGTH) (p. 416)
retransmit-interval
■ router ospf area OSPF-AREA-ID virtual-link IP-ADDR retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
■ router ospf area backbone virtual-link IP-ADDR retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
rfc1583-compatibility
■ [no] router ospf rfc1583-compatibility
421© 2008 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide