Product manual

■ join-prune-interval < 5 to 65535 > -- Configure interval at which the router will send periodic
PIM-SM Join/Prune messages(p. 417)
■ spt-threshold -- Specify whether switching to the Shortest Path Tree is enabled or disabled on
the router(p. 424)
■ state-refresh < 10 to 300 > -- Set the interval between successive State Refresh messages
originated by this router(p. 424)
■ trap < neighbor-loss | hardware-mrt-full | software-mrt-full | ... > -- Enable/disable PIM traps(p.
425)
priority
■ router pim bsr-candidate priority < 0 to 255 >
Specify the priority for the Candidate Bootstrap router.
Range: < 0 to 255 >
■ router pim rp-candidate priority < 0 to 255 >
Specify the priority for the Candidate-RP router.
Range: < 0 to 255 >
range
■ [no] router ospf area OSPF-AREA-ID range
Summarize routes matching address/mask pair.
Next Available Options:
■ ip -- Specify IP address/mask pair. (IP-ADDR/MASK-LENGTH) (p. 416)
■ no-advertise -- Do not advertise the range outside the area.(p. 417)
■ type < summary | nssa > -- Link state database type to apply the range.(p. 427)
■ [no] router ospf area backbone range
Summarize routes matching address/mask pair.
Next Available Options:
■ ip -- Specify IP address/mask pair. (IP-ADDR/MASK-LENGTH) (p. 416)
■ no-advertise -- Do not advertise the range outside the area.(p. 417)
■ type < summary | nssa > -- Link state database type to apply the range.(p. 427)
redistribute
■ [no] router ospf redistribute < connected | static | rip >
Usage: [no] redistribute <static|connected|rip>
Description: Specify source protocols which will be redistributed
into OSPF. Use the [no] form of the command to disable
redistribution of the specied protocol.
o static -- redistribute from manually congured routes.
o connected -- redistribute from locally connected network(s).
o rip -- redistribute from RIP routes.
420© 2008 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide