Product manual

ospf
■ [no] router ospf
Usage: [no] router ospf [...]
Description: Enable/disable/congure Open Shortest Path First (OSPF)
protocol on the device, or enter OSPF Conguration Context.
Called without 'no', the command enables OSPF on the device
and changes current context to OSPF Conguration Context.
Otherwise ('no' is specied) the command disables OSPF. The
command can be followed by an OSPF conguration command. Use
'router ospf ?' to get a list of all possible options.
Next Available Options:
■ area -- Define/remove an OSPF area, area range or virtual link(p. 410)
■ default-metric < 0 to 16777215 > -- The default metric used for advertising external routes
imported into OSPF by this router(p. 414)
■ distance -- Set administrative distance to associate with intra-area, inter-area and AS-external
routes learned by OSPF(p. 414)
■ metric-type < type1 | type2 > -- The default metric type used for advertising external routes
imported into OSPF by this router(p. 417)
■ redistribute < connected | static | rip > -- Specify source protocols which will be redistributed
into OSPF(p. 420)
■ restrict -- Prevent redistribution of routes via OSPF(p. 421)
■ rfc1583-compatibility -- Enable/disable RFC-1583 compatibility(p. 421)
■ trap < virtual-interface-state-change | neighbor-state-change | virtual-neighbor-state-change |
... > -- Enable/disable OSPF traps(p. 425)
override
■ [no] router pim rp-address IP-ADDR IP-ADDR/MASK-LENGTH override
Specify whether or not static RP conguration precedes the information
learned by a BSR.
pim
■ [no] router pim
Usage: [no] router pim [...]
Description: Enable/disable/congure PIM protocol on the device, or enter
PIM Conguration Context.
Called without 'no', the command enables PIM on the device
and changes current context to PIM Conguration Context.
Otherwise, the command disables PIM. The command can be
followed by a PIM conguration command. Use 'router pim ?' to
get a list of all possible options.
Next Available Options:
■ bsr-candidate -- Configure the router to advertise itself as the Candidate Bootstrap Router
(Candidate-BSR) for a PIM-SM domain(p. 412)
■ rp-address -- Statically configure the Rendezvous Point (RP) to accept multicast traffic for
specified group or range of groups(p. 422)
■ rp-candidate -- Configure router to advertise itself as the Candidate Rendezvous Point
(Candidate-RP) to the Bootstrap Router (BSR)(p. 423)
419© 2008 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide