Product manual

Next Available Option:
■ authentication-key -- OSPF authentication key (maximum 8 characters). (OCTET-STR) (p. 411)
■ router ospf area OSPF-AREA-ID virtual-link IP-ADDR authentication-key OCTET-STR
OSPF authentication key (maximum 8 characters).
■ router ospf area backbone virtual-link IP-ADDR authentication-key
Set simple authentication method and key.
Next Available Option:
■ authentication-key -- OSPF authentication key (maximum 8 characters). (OCTET-STR) (p. 411)
■ router ospf area backbone virtual-link IP-ADDR authentication-key OCTET-STR
OSPF authentication key (maximum 8 characters).
auto-summary
■ [no] router rip auto-summary
Usage: [no] auto-summary
Description: Enable/disable advertisement of summarized routes.
Summarization mechanisms should be disabled when using both
version 1 and version 2 of RIP within a single network.
backbone
■ router ospf area backbone
The backbone area (the same as 0.0.0.0).
Next Available Options:
■ normal -- Define a "normal" area.(p. 418)
■ nssa < 0 to 16777215 > -- Define a "not-so-stubby" area (or NSSA) and its cost.(p. 418)
■ stub -- Define a "stub" area and specify its cost.(p. 424)
■ range -- Summarize routes matching address/mask pair.(p. 420)
■ virtual-link -- Specify a virtual neighbor. (IP-ADDR) (p. 427)
bsm-interval
■ router pim bsr-candidate bsm-interval < 5 to 300 >
Specify the interval for sending Bootstrap messages on PIM-SM interfaces.
Range: < 5 to 300 >
bsr-candidate
■ [no] router pim bsr-candidate
Usage: bsr-candidate [source-ip-vlan <VLAN-ID>]
[hash-mask-length <1-32>]
[priority <0-255>]
[bsm-interval <5-300>]
412© 2008 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide