Product manual

retransmit-interval (p. 421)intra-area (p. 416)authentication (p. 411)
rfc1583-compatibility (p. 421)ip (p. 416)authentication-key (p. 411)
rip (p. 422)ip-addr (p. 416)auto-summary (p. 412)
rp-address (p. 422)IP-ADDR (p. 416)backbone (p. 412)
rp-candidate (p. 423)join-prune-interval (p. 417)bsm-interval (p. 412)
source-ip-vlan (p. 424)md5-auth-key-chain (p. 417)bsr-candidate (p. 412)
spt-threshold (p. 424)metric-type (p. 417)chain-name (p. 413)
state-refresh (p. 424)no-advertise (p. 417)cost (p. 413)
stub (p. 424)normal (p. 418)dead-interval (p. 414)
transit-delay (p. 424)no-summary (p. 418)default-metric (p. 414)
trap (p. 425)nssa (p. 418)distance (p. 414)
traps (p. 426)ospf (p. 419)external (p. 415)
type (p. 427)override (p. 419)GROUP-ADDR/GROUP-MASK (p.
415) virtual-link (p. 427)pim (p. 419)
group-prefix (p. 415) vrrp (p. 428)priority (p. 420)
hash-mask-length (p. 415) range (p. 420)
hello-interval (p. 415)
area
■ [no] router ospf area
Usage: area <OSPF-AREA-ID|backbone> [normal]
area <OSPF-AREA-ID|backbone> nssa <0-16777215>
[metric-type <type1|type2>] [no-summary]
area <OSPF-AREA-ID|backbone> stub <0-16777215> [no-summary]
area <OSPF-AREA-ID|backbone> range IP-ADDR/MASK-LENGTH
[no-advertise]
area <OSPF-AREA-ID|backbone> virtual-link IP-ADDR
[transit-delay <0-3600>]
[retransmit-interval <0-3600>]
[hello-interval <1-65535>]
[dead-interval <0-2147483647>]
area <OSPF-AREA-ID|backbone> virtual-link IP-ADDR
authentication-key OCTET-STR
area <OSPF-AREA-ID|backbone> virtual-link IP-ADDR
md5-auth-key-chain CHAIN-NAME-STR
no area <OSPF-AREA-ID|backbone>
no area <OSPF-AREA-ID|backbone> range IP-ADDR/MASK-LENGTH
no area <OSPF-AREA-ID|backbone> virtual-link IP-ADDR
[authentication]
Description: Dene/remove an OSPF area, area range or virtual link.
- 'area... [normal]' command denes a normal area. Area can be
identied by a single integer or an IP address style dotted
decimal. Use 0.0.0.0 address or 'backbone' keyword to specify the
backbone area.
- 'area... nssa...' denes a "not-so-stubby" area (or NSSA)
and its cost. You can specify also the metric type and/or disable
summary LSA to be sent into the area.
- 'area... stub...' denes a "stub" area and cost to use when
injecting default routes of a border router into the area. If
'no-summary' is specied then no summary LSA will be sent into
the area.
- 'area... range...' denes a range of IP addresses the area
consists of and directs to summarize routes matching the range.
If 'no-advertise' is specied then the range will not be
advertised outside the area.
410© 2008 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide