Product manual

■ reauth-period < 0 to 9999999 > -- Set the re-authentication timeout in seconds; set to '0' to

disable re-authentication (default 0). (NUMBER) (p. 47)

■ auth-vid -- Configures VLAN where to move port after successful authentication (not configured

by default).(p. 30)

■ unauth-vid -- Configures VLAN where to keep port while there is an unauthorized client

connected (not configured by default).(p. 52)

■ reauthenticate -- Force re-authentication to happen.(p. 47)

max-requests

■ aaa port-access authenticator [ETHERNET] PORT-LIST max-requests < 1 to 10 >

Set maximum number of times the switch retransmits

authentication requests (default 2).

Range: < 1 to 10 >

■ aaa port-access mac-based [ETHERNET] PORT-LIST max-requests < 1 to 10 >

Set maximum number of times the switch retransmits authentication requests (default

3).

Range: < 1 to 10 >

■ aaa port-access web-based [ETHERNET] PORT-LIST max-requests < 1 to 10 >

Set maximum number of times the switch retransmits authentication requests (default

3).

Range: < 1 to 10 >

max-retries

■ aaa port-access web-based [ETHERNET] PORT-LIST max-retries < 1 to 10 >

Set number of times a client can enter their credentials before authentication is

considered to have failed (default 3).

Range: < 1 to 10 >

max-start

■ aaa port-access supplicant [ETHERNET] PORT-LIST max-start < 1 to 10 >

Dene the maximum number of attempts taken to start authentication

(default 3).

Range: < 1 to 10 >

method

■ aaa accounting commands < stop-only > < radius >

Specify which accounting method to use (radius)

Supported Values:

■ radius -- Use RADIUS protocol as accounting method.

■ aaa accounting exec < start-stop | stop-only > < radius >

Specify which accounting method to use (radius)

Supported Values:

aaaCommand Line Interface Reference Guide