Product manual

Supported Values:
■ management-module1 -- Configures management-module 1 as an active management module
for next boot
■ management-module2 -- Configures management-module 2 as an active management module
for next boot
■ standby -- Configures standby module as an active management module for next boot
disable
■ redundancy fabric-module < 1 | 2 > disable
Disable the fabric module.
enable
■ redundancy fabric-module < 1 | 2 > enable
Enable the fabric module.
fabric-module
■ redundancy fabric-module < 1 | 2 >
Enable/Disable fabric modules.
Supported Values:
■ 1 -- enable/disable fabric module-1
■ 2 -- enable/disable fabric module-2
Next Available Options:
■ enable -- Enable the fabric module.(p. 401)
■ disable -- Disable the fabric module.(p. 401)
management-module
■ [no] redundancy management-module
Enable/Disable redundant management.
switchover
■ redundancy switchover
Switchover to the standby management module.
401© 2008 Hewlett-Packard Development Company, L.P.
redundancyCommand Line Interface Reference Guide