Product manual

mesh

OVERVIEW

Redundant PathsCategory:

configPrimary context:

show mesh (page 488)Related Commands

Usage: [no] mesh [ethernet] PORT-LIST

Description: Congure the specied ports as being members of a mesh group.

A mesh group can have up to 24 member ports.

- VLAN support must be enabled before conguring a mesh group.

- A mesh group cannot exist if IP routing is enabled. Disable

routing protocols (if any) before conguring a mesh group.

- After conguring meshing, it will be necessary to reboot the

switch before the changes take effect.

COMMAND STRUCTURE

■ [no] mesh portlist -- Specify the ports that are to be added to/removed from a mesh. ([ethernet]

PORT-LIST) (p. 352)

EXAMPLES

Example: mesh PORT-LIST

Configure meshing on ports A1-A4, B3, C1, and D1-D3:

COMMAND DETAILS

portlist (p. 352)

portlist

■ [no] mesh [ETHERNET] PORT-LIST

Specify the ports that are to be added to/removed from a mesh.