Product manual

Set the authenticator to Force Authorized, Force

Unauthorized or Auto state (default Auto).

Supported Values:

■ authorized -- Force authorized.

■ auto -- Auto.

■ unauthorized -- Force unauthorized.

controlled-direction

■ aaa port-access [ETHERNET] PORT-LIST controlled-direction < both | in >

Congure how trafc is controlled on non-authenticated ports; in

BOTH directions (ingress+egress) or IN only (ingress).

Supported Values:

■ both -- Exert control in both directions.

■ in -- Exert control on incoming packets.

dhcp-addr

■ aaa port-access web-based dhcp-addr IP-ADDR/MASK-LENGTH

Set the base address / mask for the temporary pool used by DHCP (base address default

is 192.168.0.0, mask default is 24 - 255.255.255.0).

dhcp-lease

■ aaa port-access web-based dhcp-lease < 5 to 25 >

Set the lease length of the IP address issued by DHCP (default 10).

Range: < 5 to 25 >

enable

■ aaa authentication console enable

Congure access to the privileged mode commands.

Next Available Option:

■ primary < local | tacacs | radius > -- Specify the primary authentication method for access

control.(p. 43)

■ aaa authentication telnet enable

Congure access to the privileged mode commands.

Next Available Option:

■ primary < local | tacacs | radius > -- Specify the primary authentication method for access

control.(p. 43)

■ aaa authentication web enable

Congure access to the privileged mode commands.

Next Available Option:

■ primary < local | radius > -- Specify the primary authentication method for access control.(p.

43)

aaaCommand Line Interface Reference Guide