Product manual

facility
■ [no] logging facility < kern | user | mail | ... >
Usage: [no] logging facility <facility>
Description: Specify the syslog facility value that will be used
for all syslog servers. Syslog facility determines
where syslog servers should log the syslog message.
Supported Values:
■ kern
■ user
■ mail
■ daemon
■ auth
■ syslog
■ lpr
■ news
■ uucp
■ sys9
■ sys10
■ sys11
■ sys12
■ sys13
■ sys14
■ cron
■ local0
■ local1
■ local2
■ local3
■ local4
■ local5
■ local6
■ local7
ip-address
■ [no] logging IP-ADDR
Usage: [no] logging <IP-ADDR>
[no] logging facility <facility>
[no] logging severity <severity>
[no] logging system-module <module>
Description: Add an IP address to the list of receiving syslog servers.
Use of 'no' without an IP address specied will remove all
IP addresses from the list of syslog receivers. If an IP
address is specied, that receiver will be removed.
- Specify syslog server facility with <facility>. 'no
logging facility <facility>' sets facility back to defaults.
- Specify severity for event messages to be ltered to the
syslog server with <severity>. 'no logging severity
<severity>' sets severity back to default.
- Event messages of specied system module will be sent to
the syslog server. 'no' sends messages from all system
modules. Messages are 1st ltered by selected severity.
341© 2008 Hewlett-Packard Development Company, L.P.
loggingCommand Line Interface Reference Guide