Product manual

Next Available Option:
■ vlan-name -- Specify that the VLAN name TLV is to be advertised. (p. 336)
dot3TlvEnable
■ [no] lldp config [ETHERNET] PORT-LIST dot3TlvEnable < macphy_config >
Specify the 802.3 TLV List to be advertised.
Supported Values:
■ macphy_config -- MAC Physical Config Tlv
elin-addr
■ [no] lldp config [ETHERNET] PORT-LIST medPortLocation elin-addr
Specify the elin address location to be advertised.
Next Available Option:
■ addr -- Specify the Location name to be advertised. (OCTET-STR) (p. 331)
enable-notification
■ [no] lldp enable-notification [ETHERNET] PORT-LIST
Usage: [no] lldp noticationEnable <PORT-LIST>
Description: Set the port for which notication should be enabled.
fast-start-count
■ lldp fast-start-count < 1 to 10 >
Usage: lldp fast-start-count <1-10>
Description: Set MED fast-start count in seconds.
Range: < 1 to 10 >
holdtime-multiplier
■ lldp holdtime-multiplier < 2 to 10 >
Usage: lldp holdtime-multiplier <2-10>
Description: Set holdtime-multipler between <2-10>; the default is 4.
Range: < 2 to 10 >
ipAddrEnable
■ [no] lldp config [ETHERNET] PORT-LIST ipAddrEnable IP-ADDR
Set IP ADDR to be enabled.
medPortLocation
■ [no] lldp config [ETHERNET] PORT-LIST medPortLocation
334© 2008 Hewlett-Packard Development Company, L.P.
lldpCommand Line Interface Reference Guide