Product manual

config
■ lldp config [ETHERNET] PORT-LIST
Usage: [no] lldp cong <PORT-LIST> <basicTlvEnable TLVMAP |
dot1TlvEnable vlan-name |
dot3TlvEnable TLVMAP |
ipAddrEnable IP-ADDR |
medPortLocation ... |
medTlvEnable TLVMAP>
Description: Specify congurational parameters to the port.
Set basicTlvEnable with any one of the following TLV Maps.
port_descr : Send Port Description TLV out this port.
system_name : Send System Name TLV out this port.
system_descr : Send System Descr TLV out this port.
system_cap : Send Capability TLV out this port.
Set dot1TlvEnable with the following TLVs.
vlan_name : Enable VLAN name TLV out the given port(s).
Set dot3TlvEnable with the following TLV Map.
macphy_cong : Send Mac Phy Cong TLV out this port.
Set ipAddrEnable with the IP-ADDR to send out this port.
Set medPortLocation with location information for the port.
civic-addr : Set civic address to send out this port.
elin-addr : Set elin address to send out this port.
Set medTlvEnable with any one of the following TLV Maps.
capabilities : Send Capability TLV out this port.This TLV has
to be enabled rst to enable any MED TLV's.
network_policy : Send Network Policy TLV out this port.
location_id : Send Location Id TLV out this port.
poe : Send Med Poe TLV out this port.
Next Available Options:
■ basicTlvEnable < port_descr | system_name | system_descr | ... > -- Specify the Basic TLV List
to be advertised. (NUMBER) (p. 332)
■ ipAddrEnable -- Set IP ADDR to be enabled. (IP-ADDR) (p. 334)
■ dot1TlvEnable -- Specify the 802.1 TLV List to be advertised.(p. 333)
■ medTlvEnable < capabilities | network_policy | location_id | ... > -- Specify the MED TLV List to
be advertised. (NUMBER) (p. 335)
■ medPortLocation -- Configure location-id information to be advertised. (p. 334)
■ dot3TlvEnable < macphy_config > -- Specify the 802.3 TLV List to be advertised. (NUMBER)
(p. 334)
COUNTRY
■ lldp config [ETHERNET] PORT-LIST medPortLocation civic-addr COUNTRY
Specify the Country Code of two characters.
Next Available Option:
■ WHAT -- Specify the 'what' number of range <0-2>. (NUMBER) (p. 336)
dot1TlvEnable
■ lldp config [ETHERNET] PORT-LIST dot1TlvEnable
Specify the 802.1 TLV List to be advertised.
333© 2008 Hewlett-Packard Development Company, L.P.
lldpCommand Line Interface Reference Guide