Product manual

■ timeout < 5 to 120 > -- Specify the maximum length of time (seconds) permitted for protocol

negotiation and authentication. (NUMBER) (p. 288)

■ ip-version < 4 | 6 | 4or6 > -- Specify the type of connections the daemon should listen for.(p.

281)

standard

■ [no] ip access-list standard

Congure a standard Access Control List.

Next Available Options:

■ name -- Specify name of Access Control List to configure. (ASCII-STR) (p. 282)

■ number < 1 to 99 > -- Specify Access Control List to configure by number. (p. 283)

start-seq-num

■ ip access-list resequence NAME < 1 to 2147483647 >

Specify the starting sequence number.

Range: < 1 to 2147483647 >

Next Available Option:

■ increment < 1 to 2147483646 > -- Specify the increment. (p. 279)

timeout

■ ip arp-age < 1 to 1440 >

Usage: [no] ip arp-age <[0..1440]|innite>

Description: Modify Address Resolution Protocol (ARP) table entry timeout,

specied in minutes.

The default timeout is 20 minutes.

o <0..1440> - timeout specied in minutes.

o innite - sets the timeout to 0. A value of 0 indicates an innite

timeout to the switch.

Range: < 1 to 1440 >

■ ip ssh timeout < 5 to 120 >

Specify the maximum length of time (seconds) permitted for protocol negotiation and

authentication.

Range: < 5 to 120 >

timep

■ [no] ip timep

Usage: [no] ip timep [<dhcp|[manual <IP-ADDR | IPV6-ADDR>]> [interval <1-9999>]]

Description: Congure the method to acquire the Timep server address.

ipCommand Line Interface Reference Guide