Product manual

o [ethernet] <PORT-NUM> -- Port number on which the IP-to-MAC and VLAN
binding is congured in.
Next Available Option:
■ vlan -- (VLAN-ID) (p. 289)
source-route
■ [no] ip source-route
Usage: [no] ip source-route
Description: Enable/disable forwarding of source routed packets.
ssh
■ [no] ip ssh
Usage: ip ssh letransfer
port <<1-65535>|default>
public-key <operator|manager> KEYSTRING
ip-version <4|6|4or6>
timeout <5-120>
no ip ssh [letransfer]
Description: Enable/disable SSH server on the device or set various SSH
server parameters.
Parameters:
o 'letransfer' - Enable/disable secure le transfer
capability. (SCP and SFTP) Secure le transfer will not
function unless SSH is also enabled.
o 'port <<1-65535>|default>' - Set the TCP port on which the
daemon should listen for SSH connections. The default is 22.
o 'public-key <operator|manager> KEYSTRING' - set a key for
public-key authentication. The KEYSTRING parameter must be
enclosed in quotes--either"KEYSTRING" or 'KEYSTRING'.
Newlines may be escaped with a backslash.
o 'ip-version <4|6|4or6>' - Select the IP mode to run in.
'ip-version 4' will only accept connections from IPv4
clients. 'ip-version 6' will only accept connections from
IPv6 clients. 'ip-version 4or6' accept connections from
both IPv4 and IPv6 clients. default is 'ip-version 4or6'.
o 'timeout <5-120>' - Set the maximum length of time in
seconds permitted for initial protocol negotiation and
authentication. The default is 120 seconds.
Next Available Options:
■ filetransfer -- Enable/disable secure file transfer capability.(p. 277)
■ port -- Specify the TCP port on which the daemon should listen for SSH connections.(p. 283)
■ public-key < manager | operator > -- Configure a client public-key. (NUMBER) (p. 283)
287© 2008 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide