Product manual

Supported Values:

■ Min

■ Max

burst-normal

■ [no] ip icmp burst-normal < 0 to 1000000 >

Usage: ip icmp burst-normal <0-1000000>

Description: The maximum number of icmp replies to send per second.

The default value is 1000.

Range: < 0 to 1000000 >

connection-rate-filter

■ [no] ip access-list connection-rate-filter

Congure a connection-rate-lter Access Control List.

Next Available Option:

■ name -- Specify name of Access Control List to configure. (ASCII-STR) (p. 282)

default

■ ip ssh port default

Specify that the daemon should listen on the default TCP port (22).

default-gateway

■ [no] ip default-gateway

Usage: [no] ip default-gateway [IP-ADDR]

Description: Congure the IPv4 default gateway address, which will be

used when routing is not enabled on the switch. The IP-ADDR

must be specied if the command is not preceded by 'no'.

Preceding the command with 'no' deletes the default gateway

address.

Next Available Option:

■ ipaddr -- IPv4 address of the default gateway. (IP-ADDR) (p. 280)

dhcp

■ ip timep dhcp

Use DHCP to acquire Timep server address.

Next Available Option:

■ interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current time.(p.

279)

ipCommand Line Interface Reference Guide