Product manual
Next Available Options:
■ ip-addr -- Interface IP address/mask. (IP-ADDR/MASK-LENGTH) (p. 280)
■ dhcp-bootp -- Configure the interface to use DHCP/Bootp server to acquire parameters.(p. 276)
addrmask
■ [no] ip icmp addrmask
Usage: [no] ip icmp addrmask
Description: Enable/disable address mask replies.
arp-age
■ [no] ip arp-age
Usage: [no] ip arp-age <[0..1440]|innite>
Description: Modify Address Resolution Protocol (ARP) table entry timeout,
specied in minutes. You can set the age up to 1440 minutes (24 hours).
The default timeout is 20 minutes.
o <0..1440> - timeout specied in minutes.
o innite - sets the timeout to 0. A value of 0 indicates an innite
timeout to the switch. (Internally the ARP age timeout is set to 99,999,999
seconds (approximately 3.2 years)
Next Available Options:
■ timeout < 1 to 1440 > -- Modify Address Resolution Protocol (ARP) table entry timeout, specified
in minutes (NUMBER) (p. 288)
■ infinite -- Causes the ARP timeout to be set to 0, indicating an infinite timeout period. (p. 279)
Example 1. Example of ip arp-age Command
ProCurve(config)# ip arp-age 1000
authorized-managers
■ [no] ip authorized-managers
Usage: [no] ip authorized-managers <IPV4-ADDR [IPV4-MASK]>
access [manager|operator] [IPV4-MASK]
Description: Dene the IPV4 addresses allowed to manage the switch.
Clients using the specied IPV4 addresses are allowed
to access the switch's web browser interface, telnet to
the switch and to perform TFTP operations.
A maximum of 10 addresses may be congured.
Parameters:
o IPV4-ADDR - The IPV4 address of an authorized manager.
o IPV4-MASK - A mask that allows you to dene which portions of
273© 2008 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide