Product manual
standard (p. 288)keystring (p. 281)directed-broadcast (p. 276)
start-seq-num (p. 288)load-sharing (p. 281)distance (p. 276)
timeout (p. 288)load-sharing-value (p. 282)dns (p. 276)
timep (p. 288)mac (p. 282)domain-name (p. 277)
ttl (p. 289)manual (p. 282)echo (p. 277)
udp-bcast-forward (p. 289)multicast-routing (p. 282)extended (p. 277)
unreachable (p. 289)name (p. 282)fastleave (p. 277)
vlan (p. 289)number (p. 283)filetransfer (p. 277)
zero-broadcast (p. 290)port (p. 283)forcedfastleave (p. 278)
preserve (p. 283)forward (p. 278)
access
■ ip authorized-managers IP-ADDR access < Manager | Operator >
Dene an access level desired.
Supported Values:
■ Manager
■ Operator
access-list
■ [no] ip access-list
Usage: [no] ip access-list <extended|standard|conection-rate-lter> <ACL-ID>
Description: Enter the named-acl context for the specied access control
list. The ACL-ID is case sensitive and may be up to sixty-four
characters in length. If it includes spaces, the entire ACL-ID
must be enclosed in quotation marks.
Next Available Options:
■ extended -- Configure an extended Access Control List. (p. 277)
■ standard -- Configure a standard Access Control List. (p. 288)
■ resequence -- Renumber the entries in an Access Control List. (p. 284)
■ connection-rate-filter -- Configure a connection-rate-filter Access Control List. (p. 275)
address
■ [no] ip address
Usage: [no] ip address [dhcp-bootp|IP-ADDR/MASK-LENGTH]
Description: Set IP parameters for communication within an IP network.
Parameters:
o dhcp-bootp - The switch attempts to get its conguration from a
DHCP/Bootp server.
o IP-ADDR/MASK-LENGTH - Assign an IP address to the switch.
The IP-ADDR/MASK-LENGTH may be specied in two ways using the
following syntax:
ip address 192.32.36.87/24
ip address 192.32.36.87 255.255.255.0
Both of the statements above would have the same effect.
272© 2008 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide