Product manual

from the VLAN context or follow the 'vlan VLAN-ID'

command.

vrid

■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 >

Usage: [no] vrrp vrid <VRID> [...]

Description: Congure a virtual router instance for the VLAN.

A virtual router is dened by its virtual router

identier (VRID) and a set of IP addresses for which

virtual router acts as a Master or Backup. The scope

of each virtual router is restricted to a single VLAN.

Range: < 1 to 255 >

Next Available Options:

■ backup -- Designate the virtual router instance as a Backup(p. 214)

■ owner -- Designate the virtual router instance as an Owner (Master)(p. 244)

■ virtual-ip-address -- Specify IP address to be supported by the virtual router instance(p. 266)

■ primary-ip-address -- Specify IP address the virtual router instance will use as a source in VRRP

advertisement messages(p. 251)

■ advertise-interval < 1 to 255 > -- Set time interval (in seconds) between sending VRRP

advertisement messages(p. 206)

■ priority < 1 to 255 > -- Configure priority for the virtual router instance(p. 251)

■ preempt-mode -- Enable/disable preempt mode for the virtual router instance(p. 250)

■ preempt-delay-time < 1 to 600 > -- Enable the pre-emptive delay timer for the virtual router

instance(p. 250)

■ enable -- Enable/disable operation of the virtual router instance(p. 219)

vrrp

■ [no] interface vlan VLAN-ID vrrp

Usage: [no] vlan <VLAN-ID> vrrp vrid <VRID> [...]

Description: Enable/disable/congure VRRP operation on the VLAN.

Use 'vrrp vrid <VRID> ?' to get a list of all possible options.

This is a VLAN context command. It can be called directly from

the VLAN context or follow the 'vlan VLAN-ID' command.

Next Available Option:

■ vrid < 1 to 255 > -- Configure a virtual router instance for the VLAN(p. 268)

interfaceCommand Line Interface Reference Guide