Product manual

Description: Add, delete, edit VLAN conguration or enter a VLAN context.
If an existing VLAN-ID is specied you are put into the
context for that VLAN, and can then execute commands for that
VLAN. If a new VLAN-ID is specied, the new VLAN is added with
the VLAN-ID, and you are put into the context of the new VLAN.
If you follow the command with one of the VLAN Context commands
in the same command line, the context level is not changed, but
the commands are executed for the VLAN specied by the
VLAN-ID. The 'no' option of the VLAN command is used to delete
the VLAN specied by VLAN-ID.
Next Available Options:
■ auto -- Cause each port identified in the port list to learn its VLAN membership using the GARP
VLAN Registration Protocol (GVRP) ([ethernet] PORT-LIST) (p. 212)
■ dhcp-snooping -- (p. 217)
■ ip -- Configure various IP parameters for the VLAN(p. 225)
■ igmp-proxy -- Associate an IGMP proxy domain with a VLAN(p. 224)
■ ipv6 -- Configure various IP parameters for the VLAN(p. 230)
■ connection-rate-filter -- Re-enables access to a host or set of hosts that has been previously
blocked by the connection rate filter(p. 215)
■ monitor -- Define either the VLAN is to be monitored or not(p. 238)
■ name -- Set the VLAN's name (ASCII-STR) (p. 242)
■ protocol -- Set a predefined protocol for the current VLAN. (p. 253)
■ qos -- Set VLAN-based priority(p. 254)
■ tagged -- Assign ports to current VLAN as tagged ([ethernet] PORT-LIST) (p. 263)
■ untagged -- Assign ports to current VLAN as untagged ([ethernet] PORT-LIST) (p. 266)
■ forbid -- Prevent ports from becoming a member of the current VLAN ([ethernet] PORT-LIST)
(p. 220)
■ voice -- Labels this VLAN as a Voice VLAN, allowing you to separate, prioritize, and authenticate
voice traffic moving through your network(p. 267)
■ jumbo -- Labels this VLAN as a Jumbo VLAN, allowing you to pass packets up to 9220 bytes
in size(p. 232)
■ vrrp -- Enable/disable/configure VRRP operation on the VLAN(p. 268)
■ ip-recv-mac-address -- Associates a L3-mac-address with a VLAN(p. 229)
voice
■ [no] interface vlan VLAN-ID voice
Usage: [no] voice
Description: Labels this VLAN as a Voice VLAN, allowing you to separate,
prioritize, and authenticate voice trafc moving through
your network.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
■ [no] interface svlan VLAN-ID voice
Usage: [no] voice
Description: Labels this VLAN as a Voice VLAN, allowing you to separate,
prioritize, and authenticate voice trafc moving through
your network.
This is a VLAN context command. It can be called directly
267© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide