Product manual

■ interface vlan VLAN-ID ip ospf all transit-delay < 1 to 3600 >
Set transit delay in seconds; the default is 1.
Range: < 1 to 3600 >
trust
■ [no] interface [ETHERNET] PORT-LIST dhcp-snooping trust
Usage: [no] dhcp-snooping trust PORT-LIST
Description: Congure trusted interfaces. Only server packets received
on trusted interfaces will be forwarded. When 'no' is
specied the interfaces are marked as untrusted.
The default port state is untrusted.
Parameters:
o PORT-LIST - Port list on which to congure trust status.
■ [no] interface [ETHERNET] PORT-LIST arp-protect trust
ttl-threshold
■ interface vlan VLAN-ID ip pim-dense ttl-threshold < 0 to 255 >
Usage: ip pim-dense ttl-threshold <0-255>
Description: Set the Time To Live in a PIM-DM State Refresh message at
which it is not forwarded on this interface. Default is 0.
Range: < 0 to 255 >
■ interface vlan VLAN-ID ip mroute ttl-threshold < 0 to 255 >
Usage: ip mroute ttl-threshold <0-255>
Description: Set the multicast datagram TTL threshold for the interface.
Any IP multicast datagrams with a TTL less than this threshold
will not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the interface.
Range: < 0 to 255 >
type
■ interface [ETHERNET] PORT-LIST type < Trunk | | | ... >
Supported Values:
■ Trunk
■
■
■ 10FL
■ 10T
■ 10/100TX
■ 100FX
■ 100FX-SFP
■ Vlan
■ Mesh
■ 1000SX
264© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide