Product manual

Next Available Options:
■ authentication-type < none | text > -- Set authentication type used on this interface.(p. 212)
■ authentication-key -- Set RIP authentication key (maximum 16 characters).(p. 211)
■ metric < 1 to 15 > -- Set metric for this interface.(p. 235)
■ poison-reverse -- Enable/disable poison reverse on this interface.(p. 248)
■ receive < V1-only | V2-only | V1-or-V2 | ... > -- Define RIP version for incoming packets.(p. 258)
■ send < disabled | V1-only | V1-compatible-V2 | ... > -- Define RIP version for outgoing packets.(p.
260)
■ rip-compatible < V1-only | V2-only | V1-or-V2 > -- Define RIP version for incoming and outgoing
packets.(p. 260)
■ ip-addr -- Specify the IP address the request is for. (IP-ADDR) (p. 227)
■ all -- Process the request for all IP addresses.(p. 207)
rip-compatible
■ interface vlan VLAN-ID ip rip < V1-only | V2-only | V1-or-V2 >
Dene RIP version for incoming and outgoing packets.
Supported Values:
■ V1-only -- Use RIP version 1 only.
■ V2-only -- Use RIP version 2 only.
■ V1-or-V2 -- Use RIP 2 in the RIP 1 compatible mode.
■ interface vlan VLAN-ID ip rip IP-ADDR < V1-only | V2-only | V1-or-V2 >
Dene RIP version for incoming and outgoing packets.
Supported Values:
■ V1-only -- Use RIP version 1 only.
■ V2-only -- Use RIP version 2 only.
■ V1-or-V2 -- Use RIP 2 in the RIP 1 compatible mode.
■ interface vlan VLAN-ID ip rip all < V1-only | V2-only | V1-or-V2 >
Dene RIP version for incoming and outgoing packets.
Supported Values:
■ V1-only -- Use RIP version 1 only.
■ V2-only -- Use RIP version 2 only.
■ V1-or-V2 -- Use RIP 2 in the RIP 1 compatible mode.
send
■ interface vlan VLAN-ID ip rip send < disabled | V1-only | V1-compatible-V2 | ... >
Dene RIP version for outgoing packets.
Supported Values:
■ disabled -- Do not send RIP updates.
■ V1-only -- Send RIP version 1 updates only.
■ V1-compatible-V2 -- Send RIP 2 updates using RFC 1058 route subsumption.
■ V2-only -- Send RIP version 2 updates only.
■ interface vlan VLAN-ID ip rip IP-ADDR send < disabled | V1-only | V1-compatible-V2 | ... >
Dene RIP version for outgoing packets.
Supported Values:
260© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide