Product manual

Usage: [no] vlan < vid > ipv6 mld querier
Description: This command disables or re-enables the ability for the switch
to become querier if necessary. The no version of the command
disables the querier function on the switch.
The show ipv6 mld cong command displays the current querier
command. (Default Querier Capability: Enabled.)
queue1
■ interface [ETHERNET] PORT-LIST bandwidth-min output < 0 to 100 >
Specify min. bandwidth percentage for queue one outgoing trafc.
Range: < 0 to 100 >
Next Available Option:
■ queue2 < 0 to 100 > -- Specify min. bandwidth percentage for queue two outgoing traffic.(p.
256)
queue2
■ interface [ETHERNET] PORT-LIST bandwidth-min output < 0 to 100 > < 0 to 100 >
Specify min. bandwidth percentage for queue two outgoing trafc.
Range: < 0 to 100 >
Next Available Option:
■ queue3 < 0 to 100 > -- Specify min. bandwidth percentage for queue three outgoing traffic.(p.
256)
queue3
■ interface [ETHERNET] PORT-LIST bandwidth-min output < 0 to 100 > < 0 to 100 > < 0 to 100 >
Specify min. bandwidth percentage for queue three outgoing trafc.
Range: < 0 to 100 >
Next Available Option:
■ queue4 < 0 to 100 > -- Specify min. bandwidth percentage for queue four outgoing traffic.(p.
256)
queue4
■ interface [ETHERNET] PORT-LIST bandwidth-min output < 0 to 100 > < 0 to 100 > < 0 to 100 >
< 0 to 100 >
Specify min. bandwidth percentage for queue four outgoing trafc.
Range: < 0 to 100 >
256© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide