Product manual

Next Available Options:

■ customer-network -- Configure qinq port-type as customer-network(p. 216)

■ provider-network -- Configure qinq port-type as provider-network(p. 254)

power-over-ethernet

■ [no] interface [ETHERNET] PORT-LIST power-over-ethernet

Usage: [no] power-over-ethernet [critical|high|low]

Description: Enable/Disable per-port power distribution. Specifying critical,

high, or low indicates the priority of the port to get power in

the event of power over-subscription. Per-port power is enabled

by default. The default priority is low.

Note: Lower numbered ports have precedence over higher numbered

ports of the same priority.

Next Available Option:

■ priority < critical | high | low > -- Enable/Disable per-port power distribution(p. 251)

preempt-delay-time

■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > preempt-delay-time < 1 to 600 >

Usage: [no] vrrp vrid <VRID> preempt-delay-time <1-600>

Description: Enable the pre-emptive delay timer for the virtual router

instance.

[no] may be used to disable the pre-emptive delay timer.

Parameters:

o preempt-delay-time <1-600> - The number of seconds to delay.

Range: < 1 to 600 >

preempt-mode

■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > preempt-mode

Usage: [no] vrrp vrid <VRID> preempt-mode

Description: Enable/disable preempt mode for the virtual router instance.

The default value is 'enabled'.

preference

■ interface vlan VLAN-ID ip irdp preference

Usage: [no] ip irdp preference <no-default|<-2147483647-2147483647>>

Description: The preferability of the router as a default

router, relative to the other routers on the same

subnet. Higher values are more preferable.

interfaceCommand Line Interface Reference Guide