Product manual

poe-value
■ interface [ETHERNET] PORT-LIST poe-value
Usage: poe-value [1-17]
Description: Maximum PoE allocation specied with a value in watts.
By default, power-over-ethernet allocation is automatic by
usage of the powered device with a maximum set at 17W
This can be changed so the POE allocation is xed at
whatever poe-value is set to and by setting the port
allocation to be by value using: poe-allocate-by value.
Next Available Option:
■ poe_value < 1 | 2 | 3 | ... > -- Maximum PoE allocation specified with a value in watts(p. 246)
poison-reverse
■ [no] interface vlan VLAN-ID ip rip poison-reverse
Enable/disable poison reverse on this interface.
■ [no] interface vlan VLAN-ID ip rip IP-ADDR poison-reverse
Enable/disable poison reverse on this interface.
■ [no] interface vlan VLAN-ID ip rip all poison-reverse
Enable/disable poison reverse on this interface.
port-list
■ interface [ETHERNET] PORT-LIST
Usage: [no] interface [ethernet] PORT-LIST [...]
Description: Enter the Interface Conguration Level, or execute one
command for that level. Without optional parameters
specied, the 'interface' command changes the context to
the Interface Conguration Context Level for execution of
conguration changes to the port or ports in the PORT-LIST.
The 'interface [ethernet] PORT-LIST' can be followed by any
command from the Interface Conguration Context Level in the
same command line. In this case the context level is not
changed, but the command is also executed for the port or ports
in the PORT-LIST. Use 'interface [ethernet] PORT-LIST ?'
to get a list of all valid commands.
Next Available Options:
■ ip -- Apply the specified access control list to inbound packets on this INTERFACE list(p. 225)
■ broadcast-limit < 0 to 99 > -- Set a broadcast traffic percentage limit(p. 215)
■ dhcp-snooping -- Configure the port as trusted or untrusted(p. 217)
■ disable -- Disable port(s)(p. 218)
■ enable -- Enable port(s)(p. 219)
■ flow-control -- Enable/disable flow control on the port(s)(p. 220)
■ gvrp -- Set the GVRP timers on the port (hundredths of a second)(p. 222)
248© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide